KSSE Multi Key Solenoid Controlled Switch

KSSE Multi Key Solenoid Controlled Switch

Safety Interlocking -> Castell Trapped Key Interlocking Systems -> Castell Solenoid Controlled Switch Interlocks -> KSSE Multi Key Solenoid Controlled Switch

E20-FSB-1E-P-C/O4-110A - 110V AC, Exchange, NO/NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-P-C/O4-110A

Details

E20-FSB-1E-P-C/O6-110A - 110V AC, Exchange, NO/NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-P-C/O6-110A

Details

E20-FSB-1E-P-CC4-110A - 110V AC, Exchange, NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-P-CC4-110A

Details

E20-FSB-1E-P-CC6-110A - 110V AC, Exchange, NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-P-CC6-110A

Details

E20-FSB-1E-F-C/O6-110A - 110V AC, Exchange, NO/NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-F-C/O6-110A

Details

E20-FSB-1E-F-C/O4-110A - 110V AC, Exchange, NO/NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-F-C/O4-110A

Details

E20-FSB-1E-F-CC4-110A - 110V AC, Exchange, NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-F-CC4-110A

Details

E20-FSB-1E-F-CC6-110A - 110V AC, Exchange, NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1E-F-CC6-110A

Details

E20-FSB-1D-P-C/O4-110A - 110V AC, Double, NO/NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1D-P-C/O4-110A

Details

E20-FSB-1D-P-C/O6-110A - 110V AC, Double, NO/NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1D-P-C/O6-110A

Details

E20-FSB-1D-P-CC4-110A - 110V AC, Double, NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1D-P-CC4-110A

Details

E20-FSB-1D-P-CC6-110A - 110V AC, Double, NC, 1 Lock Portion, Brass, Castell KSSE Multi Key Solenoid Controlled Switch

The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs to take place, i.e. where a robot has to finish a cycle prior to isolation and where multiple entry points to the protected area are required. The solenoid is continuously rated, and its position is electrically monitored. This type of isolator should be used for short term, off load isolation. Also available with up 6 lock portions. Castell Part Reference: E20-FSB-1D-P-CC6-110A

Details