Safety Control Units

Safety Control Units

MECHAN Controls -> Mechan F-SERIES Safety Systems -> Safety Control Units

Mechan FM1-24VAC - Safety Control Unit

Mechan Control's FM1 Safety control unit is the starting point for all F Series Products. The FM1 contains the regulated power supply, 2 safety contact outputs (PGC), external/internal relay monitoring/reset circuit and system indication along with the input for one safety switch sensor and its indication outputs. Mechan Controls Part Ref: FM1-24VAC

Details

Mechan FM1-24VDC - Safety Control Unit

Mechan Control's FM1 Safety control unit is the starting point for all F Series Products. The FM1 contains the regulated power supply, 2 safety contact outputs (PGC), external/internal relay monitoring/reset circuit and system indication along with the input for one safety switch sensor and its indication outputs. Mechan Controls Part Ref: FM1-24VDC

Details

Mechan FM1-110VAC - Safety Control Unit

Mechan Control's FM1 Safety control unit is the starting point for all F Series Products. The FM1 contains the regulated power supply, 2 safety contact outputs (PGC), external/internal relay monitoring/reset circuit and system indication along with the input for one safety switch sensor and its indication outputs. Mechan Controls Part Ref: FM1-110VAC

Details

Mechan FM1-240VAC - Safety Control Unit

Mechan Control's FM1 Safety control unit is the starting point for all F Series Products. The FM1 contains the regulated power supply, 2 safety contact outputs (PGC), external/internal relay monitoring/reset circuit and system indication along with the input for one safety switch sensor and its indication outputs. Mechan Controls Part Ref: FM1-240VAC

Details

Mechan FX1 - Safety Control Unit, Mechan Controls

Mechan Control's FX1 is a 17.5mm wide extender module which clips onto 35mm DIN rail and connects to the main control module (FM1) via a 6-way connector strap. The FX1 adds 1 gate switch input and corresponding LED and volt free contact indicator output. Mechan Controls Part Ref: FX1

Details

Mechan FX2 - Safety Control Unit, Mechan Controls

Mechan Control's FX2 is a 17.5mm wide extender module which clips onto 35mm DIN rail and connects to the main control module (FM1) via a 6-way connector strap. The FX1 adds 2 gate switch inputs and corresponding LED and volt free contact indicator output. Mechan Controls Part Ref: FX2

Details